Service project

Dry foam cleaning carpets

Dry foam cleaning carpets 

Dry foam cleaning carpet: (carpet cleaning and maintenance of the medium-term of)
When carpet use for quite some time, while it was still very dirty, cleaning should be arranged in advance. Usually dry foam cleaning is faster, carpet brush to erase the stains on the surface of the carpet directly.
Machinery and tools: multi-purpose cleaning machine cleaning fluid tank, carpet brush. Upright roller brush vacuum cleaner. (Small watering cans, soft small brush, small white dry towels, buckets, shovel).
Cleaning and maintenance agent:
(1) the first upright vacuum cleaner full vacuum. (If there is no upright vacuum cleaner available commonly used drum-type cleaner).
(2) remove the obvious stains. (Apart from the water-soluble and oil-soluble, glial type of stains)
(3) wipe the cleaning fluid tank installed on the machine, and against water mixture to dry foam boxes and installing electronic beating the best box, beating box reduces foam moisture, the carpet dries.
(4) will wipe to machine advance by cleaning place of most inside, plug Shang power line plug, debugging good wipe to machine lifting rod (will location adjustable to for himself operation of level location), then started machine by indoor to outdoor each line overlap one-third for scrub and mechanical walking of direction by left right, then moved Hou to another line by right left, repeat above operation until full scrub finished.
(5) push the machine to one side, remove the carpet brush. (In downtime while you pull out the power plug) before the carpet is dry after cleaning must not be on or objects on top, and blow dry carpet, and switch on the air conditioner, to speed up the carpet to dry. Note: all machinery before use you should first check the power cord, Plug and switch. After the mechanical stop, first unplug the power. Disable clean towels will be exposed to detergents rinse the parts, put the machine back not damp places. BACK PAGE